Programming Camera that uses USB

Comatose · #1 10-02-2009, 22:15

Is there a way to set the camera by USB if you use a different camera? If so, how?

Thanks,

Comatose

Daniel_LaFleur · #2 10-02-2009, 22:17

Quote:

Originally Posted by Comatose

Is there a way to set the camera by USB if you use a different camera? If so, how?

Thanks,

Comatose

There is no USB on the cRIO

Comatose · #3 11-02-2009, 20:28

There are converters from USB to Ethernet, so it would be a problem for programming. Can you set up a USB one if it was connected through a converter?

Thanks,

Comatose

Joe Ross · #4 11-02-2009, 20:34

Quote:

Originally Posted by Comatose

There are converters from USB to Ethernet, so it would be a problem for programming. Can you set up a USB one if it was connected through a converter?

See <R67>

Stuart · #5 11-02-2009, 21:19

If you were to have an off board computer,that did not violate any COTS rules, and you hooked said computer to the cRio using the serial port or some other port. then yes you could have a USB camera . .you would also have to program every thing to get the camera to work with the off board computer, how it would communicate, then what it would do after that. So yes it is possible.

RyanCahoon · #6 12-02-2009, 01:14

Quote:

Originally Posted by Stuart

If you were to have an off board computer,that did not violate any COTS rules, and you hooked said computer to the cRio using the serial port or some other port. then yes you could have a USB camera . .you would also have to program every thing to get the camera to work with the off board computer, how it would communicate, then what it would do after that. So yes it is possible.

This is the way you'd have to do it, but you're out of luck for the serial port. Digital I/O, Analog In, I2C only.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone have any leads on the steering wheel controller that uses a 15 pin connector?	waialua359	Control System	20	30-01-2008 12:58
away around the USB chicklet for using USB Controllers	Stobei	Programming	2	26-01-2008 14:27
Gameport to Usb cable vrs. Usb Chicklet	haywirerobotics	Control System	4	25-01-2007 19:03
Creative uses for the USB Port	Zero-Bee	Control System	53	23-01-2007 18:01
Camera Help (New to Camera Programming)	Idaman323	Programming	6	14-01-2006 03:56