Errors on LabVIEW

[Greg McKaskle]

56 is a timeout on a network operation. Simplify the network connection and see if that helps.

To get quick explanation of errors, you can use Help>>Explain Error, or you can usually right click on an error control and Explain...

Greg McKaskle

[Jon236]

Originally Posted by Greg McKaskle

56 is a timeout on a network operation. Simplify the network connection and see if that helps.


Greg McKaskle

All I had was a crossover cable from the laptop to the cRio

[Mark McLeod]

Try running through the DS, using it as a switch. e.g., PC to DS to cRIO wired directly. Sometimes using a switch as an intermediary smooths communications.

[Greg McKaskle]

Make sure to disable firewalls, and perhaps try on a different computer.

Greg McKaskle

[Alan Anderson]

Originally Posted by Greg McKaskle

56 is a timeout on a network operation.

One thing that might point to is a mismatch in the network addressing. Make sure your computer's IP address and mask are what they should be (10.2.36.6/255.255.255.0), and that the cRIO Imaging Tool is being told the correct team number (236). You could also get away with using 255.0.0.0 for the network mask.