Jaguar Flashing Light Disable Problem

Alan Anderson · #1 10-02-2009, 23:25

If you're using a four-motor drive system, you might have two of them swapped so they're fighting each other during an attempted turn. This could perhaps end up pulling the battery voltage low enough to disable the PWM outputs but still not trip the Jaguars' own low-voltage detection. Try taking out all of the drive motors' circuit breakers and put them back in one at a time to verify that each motor does what you expect it to.

Mike Yaremko · #2 11-02-2009, 14:55

we found the problem we didnt have power going to the sidecar. Now everything works. Thanks for all the help

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jaguar yellow blinking light after updates	Team 691	Electrical	8	26-01-2009 00:14
Jaguar Problem	Sauce	Electrical	7	10-01-2009 14:28
Jaguar and Victor Flashing lights?	programmr	FRC Control System	24	17-12-2008 15:44
Disable Encoders Problem	mftaberner	Programming	10	09-02-2007 23:26
Flashing Battery Light	Max Brin	Technical Discussion	3	12-01-2006 11:46