|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
2594 Preview
We have been getting a lot of requests for videos, and more pictures. The main problem was that I was putting them up, on our old thread. The problem with that is that our other thread is so deep in Delphi, that I am going to post a new thread that way people can find a link to the videos we have, so here they are:
http://www.youtube.com/watch?v=xDHkYPW5RfA http://www.youtube.com/watch?v=I4xAapmRKcI http://www.youtube.com/watch?v=nvAHAL4kdco http://www.youtube.com/watch?v=YC60mZ9YuN0 http://www.youtube.com/watch?v=LJEEPHB51XM You can see the evolution of the robot through these videos. First just a chassis, then we have Mach One of the tube, (Videos two and three), and then Mach Two, (Videos four and five), which is the current setup that we are using. Thanks to all of the people that have given such awesome feedback and comments. Good Luck to all teams. Also our website: http://naskco-robotics.org/ This is the website that we made, our first ever website that my friend and I made. Not bad for two rookies in the subject. |
|
#2
|
|||
|
|||
|
Re: 2594 Preview
By looking at previous pictures you posted, i was kinda expecting the balls to shoot a lot faster out of there. I'm kinda disappointed XDD
|
|
#3
|
|||||
|
|||||
|
Looks awesome! Are you going to put something on the end?.. Or are you just having them shoot out like that? Either way, it looks really promising!!
|
|
#4
|
||||
|
||||
|
Re: 2594 Preview
These are older videos befor we changed the bursh motor to a sim motor.
It now spins at a much faster pace shooting the balls faster. Also we are currently attatching an extention piece for the end that has one bursh on it with it's own motor so it will be the 'power' at the end of the line ;] Cindi |
|
#5
|
||||
|
||||
|
Re: 2594 Preview
how did you manage to put a SIM on the shooter? What are you using for your drive wheels?
|
|
#6
|
|||||
|
|||||
|
Re: 2594 Preview
Two of the other three allowed CIMs, I believe.
|
|
#7
|
||||
|
||||
|
Re: 2594 Preview
I saw four SIMs on their earlier pictures; one per wheel. I'm wondering if that changed.
|
|
#8
|
|||||
|
|||||
|
Re: 2594 Preview
They said that they changed it to 2WD.
|
|
#9
|
||||
|
||||
|
Re: 2594 Preview
Thanks, I missed that.
![]() |
|
#10
|
||||
|
||||
|
Re: 2594 Preview
Yes sadly we had to change it to 2WD from the rear cus the motors were hitting the cage. however this became an advantage to us allowing us to put more power to the brushes.
Were going to Micron today where they have graciously set up a practive feild for us to practice on so we hope to have more pics and vidoes up soon. Thanks for all your support Cindi |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1153 preview | B_Dubbs | Robot Showcase | 19 | 14-03-2009 20:42 |
| 2594 Robot Preview | Van Tassel | Robot Showcase | 56 | 21-02-2009 15:35 |
| Team 675 Preview | fieldd | Robot Showcase | 12 | 10-02-2009 12:54 |
| A preview of 230's animation | -PauL- | 3D Animation and Competition | 6 | 17-01-2005 16:39 |
| Timer Preview | Nate Smith | General Forum | 2 | 05-03-2003 12:25 |