|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
|
|||
|
|||
|
Re: adding a second joystick to TeleOp Init
You need to edit the typedef for the Robot Data In control. There are at least three ways to open the typedef. Use any one of the these three:
1. Select the Robot Data In control on the front panel and select Edit->Customize Control... from the front panel 2.or right click the control and select "Open Typedef". 3. or Goto the project explorer, open the TypeDefs folder, and double click RobotData.ctl Once the typedef is open, add a 2nd JoystickDevRef and name it to reflect what it does. Save the control |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Adding all devices to Typedef increases Teleop by 100 ms per iteration | rwood359 | NI LabVIEW | 1 | 07-02-2009 22:11 |
| adding second camera | iwdu15 | Electrical | 1 | 01-02-2007 20:53 |
| Wierd basic init | Jeremy J | Programming | 5 | 06-02-2003 11:42 |
| Basic Init Error | yan184 | Programming | 5 | 14-12-2002 13:10 |
| Programming the second joystick in PBASIC | archiver | 2001 | 2 | 24-06-2002 00:25 |