|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
My team is trying to set the new driver station update but we are not able to updated and we have try using different USB drives and we have not been able to do it, by some of the post that we read they said that we need to plug the USB first and then put power to the driver station but it does not work. We are trying to put the 2009-02-010a3 can some one help us
![]() |
|
#2
|
||||
|
||||
|
Re: driver station firmware update
Many USB flash drives are not compatible with the driver station especially the U3 flash drives.
Have you checked the extension of the file you are updating on the driver station. It should be exactly DSUD_PKG.bin see here for more details. http://www.chiefdelphi.com/forums/sh...ad.php?t=72229 Read through the guide carefully. You need to hold down the buttons longer than normal buttons. http://www.usfirst.org/uploadedFiles...structions.pdf |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| driver station firmware update | bobbyt14 | Programming | 15 | 14-02-2009 15:05 |
| Driver Station firmware revison | idahorobot | FRC Control System | 3 | 13-02-2009 22:39 |
| Driver Station Firmware Update 2009-01-22c1 | Mark McLeod | FRC Control System | 4 | 09-02-2009 11:52 |
| driver station and cRIO firmware update help | asianfez123 | FRC Control System | 1 | 16-01-2009 02:34 |
| Driver Station firmware update failure | ofshea | FRC Control System | 8 | 13-01-2009 11:35 |