Getting Html and/or text reports from cRIO

Greg McKaskle · #1 14-02-2009, 22:18

It will get a little more complicated, but here is the way to do it.

Build a VI to produce the report, put the VI under the My Computer target instead of the cRIO. When you want it to run on the laptop, you will use the VI server to run the VI. There are plenty of examples for how to use it to remotely execute a VI.

Greg McKaskle

airnate · #2 14-02-2009, 23:18

If you must save the file on the cRIO file system, you can put a USB flash drive (aka USB stick) in the cRIO USB port and write it to the flash drive. Then, obviously, you can remove the USB flash drive and copy the file to the laptop.

Alan Anderson · #3 15-02-2009, 01:24

Quote:

Originally Posted by airnate

...you can put a USB flash drive (aka USB stick) in the cRIO USB port...

What cRIO USB port?

airnate · #4 15-02-2009, 12:54

Oops, beg your pardon. I guess the USB port was removed for the FRC version of the cRIO. My mistake.

dqmot17 · #5 15-02-2009, 14:34

you can ftp to your cRIo. I used it successfully.
go to a browser and type ftp://10.xx.yy.2

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whos getting a second CRio	lenny8	FRC Control System	17	12-03-2009 15:09
Help Getting cRIO Feedback	rholokleolke	C/C++	3	29-01-2009 17:13
Getting Packets from the cRio	rfrank	Programming	2	17-01-2009 22:35
Getting help from your principal and local school district	Carl Gao	General Forum	11	25-09-2008 00:36
OI is getting bad data from RC and vice-versa	X-Istence	Programming	10	27-02-2006 23:40