|
|
|
 Obama's got to stop saying all of these FIRST like statements and should just give us money and show up at Championship. - Chris is me [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Obama's got to stop saying all of these FIRST like statements and should just give us money and show up at Championship. - Chris is me [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
Code deploys but does not save to cRIO
heres what happens:
we have the laptop plugged by ethernet cable into the driver station. we will deploy the code we're working on and everything seems fine. the robot runs and all functions are OK till we stop. if we unplug the laptop and start the robot again nothing happens. its like we have to have a computer attached to the driver station to deploy each time we want the robot to work. it seems like the program we deploy is not saving to the cRIO. How do we get our code to save on the cRIO so that it runs when it is powered up and without a laptop attached anywhere in the system? Is there a switch or something im supposed to flip or a special Save button? By the way, im not very computer savy so explain it in as much detail as possible please. thanks. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| The Program Compiles and Deploys, but the sidecar doesn't connect | pj174208 | Programming | 1 | 14-02-2009 18:26 |
| Crio network light does not light when camera plugged in | Bongle | Programming | 16 | 16-01-2009 11:00 |
| cRIO wont save program | Arcre | NI LabVIEW | 5 | 07-01-2009 11:45 |
| URGENT HELP: IR board TRAINS but does not RECIEVE | dan_h | Sensors | 6 | 20-02-2008 20:31 |
| frc_camera not working but labview does | Issues | Programming | 7 | 18-01-2006 19:23 |
Threaded Mode