PRO-E TUTORIALS

[ferc]

Hi Mark,
I would like to change the length dimensions of the c-channel imported from the CAD FRC library of parts.But when I try to right click the c-channel, no sketch feature or extrusion feature of c-channel appears in the model tree.

So i couldn't edit the sketch or extrusion length to change the length of the channel.Kindly let me know how to modify it.

thanks and regards,
Murthy

[PTC_FRC]

Hi Murthy,

Did you download the parts from www.ptc.com/go/firstkop? Or did you download it form the www.firstcadlibrary.com?

If you downloaded it from the firstcadlibrary.com, the files are not native Pro/E. You would not be able to modify the dimensions.

I suggest you grab the same model from the ptc.com site....as they are native Pro/E models.

let me know which ones you grabbed and we can discuss the steps to edit.

mark

[ferc]

Hello Mark,
I think grabbed the parts from firstcadlibrary.com.But I'm almost done with the model now.However I'm terrible need of your help in conducting dynamic analysis which are described as follows:

(1) to determine the velocity at which if the robot hits an object it can tip off
(2) to check the displacement of the robot when certain amount of force is applied to the robot on its structure

I tried several online resources to find this but I could get any lead on this.
Can you clearly tell me how to conduct this.Also I think this portion of analysis was not available in the online classes.

Waiting for your support,

Thanks and regards,
Murthy

[PTC_FRC]

Hi Murthy,

Send me an email with the details and we can look at the problem.

mfischer@ptc.com

Thanks,
Mark