|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Drivers station problems
When we try to put new code on the cRIO our drivers station switches to WatchDog mode when enabled and the voltage of the battery goes to 0V. Can anyone help?
|
|
#2
|
|||
|
|||
|
Re: Drivers station problems
using LOLCODE will easily fix this problem for you
Last edited by ringo115 : 15-02-2009 at 15:43. |
|
#3
|
|||
|
|||
|
Re: Drivers station problems
Quote:
OR did you mean that during the load process this happens? This is normal. The LOLCODE thing is a joke, btw. |
|
#4
|
|||
|
|||
|
Re: Drivers station problems
No that happes after we deploy code.
|
|
#5
|
|||
|
|||
|
Re: Drivers station problems
The LOLCODE thing is a joke, btw.
he is aware, he is on my team |
|
#6
|
||||
|
||||
|
Re: Drivers station problems
Are you using LabVIEW or the Workbench? I know my team is using LabVIEW and we had ourselves opening the watchdog twice which caused a similar error. After going through some of our subVIs we found the extra open and got rid of it, and now it works.
I Hope that helps! |
|
#7
|
|||
|
|||
|
Re: Drivers station problems
The watchdog must be fed!!! We had the same problem. We had the same wait time in all VIs in the Teleop code. We changed one of them to a faster time and then fed the Watchdog into that VI and the problem disappears.
Thanks to John Anderson for the help on this! PS: We did not have the problem until we started using the control system at our practice session at Team 537 this past weekend. I suggest everyone check the watchdog in your teleop code. |
|
#8
|
|||
|
|||
|
Re: Drivers station problems
My programmers have gone AWOL and we are having the same problem. How do I find the watch dog and what should I check for?
Needless to say we're in a panic!!!!!!!!!!!!! Can be contacted off line at bhenze@sapulpa.k12.ok.us |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| drivers station digital input trouble | finman | Electrical | 9 | 16-02-2009 08:06 |
| Drivers Station Magical Current | 3DWolf | Electrical | 5 | 25-01-2009 21:52 |
| Drivers' Station Camera Feed | dhawk085 | Technical Discussion | 4 | 25-01-2009 19:12 |
| Telling the drivers station your alliance | Mike Mahar | Technical Discussion | 2 | 17-01-2009 12:24 |
| Telling drivers station your alliance | Mike Mahar | FRC Control System | 5 | 17-01-2009 08:43 |