What's going in your Withholding Allowance?

[Vikesrock]

Originally Posted by artdutra04

If timing belts are slipping, they need a lot more tension; making them wider only increases the force you can transfer through them.

The belt that is on there is tight as a drum. It was tensioned into place by moving one of the parts with a clamp and does not appear to flex at all when pushed on. It is not one of the 5mm kit belts, it has a much shallower profile. We are looking at belts with a deeper profile, not wider belts.

We have a nearly identical 2nd conveyor running perfectly using some fo the 5mm kit belts.