|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#13
|
||||
|
||||
|
Re: Controller board lighting system
what we did is we used the cathodes that were used off the light off "Rack & Roll" we also have a fan on our board that blows under the laptop... what we did was put a "female connector" hard mounted on our board and ran the DS fan and lights off of the power cord cumming from the transformer that is part of the kit it ran for an hour and a half one time and was fine the cord, which should be the same as the one at competition, worked great..... no need for another power supply
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| USB to controller board chicklet | ExarKun666 | Control System | 3 | 03-04-2008 06:17 |
| Autonomous Controller Board Switch | merybar | Technical Discussion | 9 | 25-03-2008 08:04 |
| Our Controller Board | LordFrz | Robot Showcase | 12 | 08-02-2008 14:31 |
| Autonomous Controller Board Switch | merybar | General Forum | 2 | 27-01-2008 12:54 |
| Cool Controller Board | jacobevelyn | Control System | 3 | 26-01-2008 13:13 |