|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#11
|
|||||
|
|||||
|
Re: What's going in your Withholding Allowance?
It looks to me that if you leave the motors as they were when you recieved them from the supplier, that is, you don't cut/strip/connect the wires or solder to the terminals, and you don't put anything on or make any modifications to the shaft, or add or change any mountings, or anything else, then you can bring as many as you want.
To be safe, you might as well just leave all your replacement parts in the boxes they were shipped in, and don't open the boxes. Getting them prepped will give your scouts something to do on Thursday. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Withholding allowance: Powering the cRIO | lingomaniac88 | Electrical | 1 | 12-02-2009 21:29 |
| What's going on? | Jack | FIRST Scouting Network | 0 | 17-10-2003 20:07 |
| What's going on in Jersey | Todd Derbyshire | Regional Competitions | 38 | 08-04-2003 01:35 |
| So What's Going On At GLR? | kevinw | Regional Competitions | 5 | 22-03-2002 21:38 |