How do you download a program and have it saved to the c-rio

[chinckley]

Originally Posted by Alan Anderson

http://decibel.ni.com/content/servle..._Framework.pdf

Pages 13-14.

Ours will not deploy the new code we wrote. It will do the default code
if we reimage the cRIO.
Do we have to do it from a particular point.

We have followed page 13-14 over and over.

See the errors in this thread.

http://www.chiefdelphi.com/forums/sh...759#post827759

Thanks for any and all help.

[trimberger]

Try an older computer. We are using an old computer with XP to do the downloading. At least one newer computer (also with XP) did not work and one Vista comptuer did not work either.

We had trouble with most of the flows on p13 and p14. We found that the one that worked for us was the numbered list at the top of p14. Follow it precisely. Don't skip any steps. You will need your driver station and cRio both powered-on. It will work through the wireless if you have the wireless setup done right. (IP address set to 10.xx.yy.n) where xxyy is your team number. n depends on the device (driver station, router for driver station, wireless adapter, cRio). See control system setup.)

Our cRio boots itself after download.

-T