recieve data from cRIO

virtuald · #1 06-03-2009, 23:59

Something very useful for feedback is the ability to write to the LCD of your DriverStation: http://thinktank.wpi.edu/article/144

byteit101 · #2 07-03-2009, 07:48

Quote:

Originally Posted by virtuald

Something very useful for feedback is the ability to write to the LCD of your DriverStation: http://thinktank.wpi.edu/article/144

but can you provide moving green and pink targets on the screen of it, while at the same time using a "taco-meter" (a meter looking like a taco, don't ask) to display the speed of another thing, a distance to target bar, and a timer for teleop and auto on the LCD? (we think not. plus, we have our dashboard working)

virtuald · #3 07-03-2009, 16:37

All that is great, as long as you have a laptop around.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Data delay between Crio and DS	Tom Line	NI LabVIEW	9	17-02-2009 08:40
Capture Data from the cRio	goodsky	Programming	2	13-01-2009 21:27
Sending data from RC to OI	Nathan	Programming	7	03-02-2008 22:32
Did we recieve MS Front Page from FIRST	Mr.G	Website Design/Showcase	2	28-01-2006 15:12
Programming Vex Starter Kit To Recieve From Serial Port	firetrap	FIRST Tech Challenge	0	26-09-2005 17:27