How do you download a program and have it saved to the c-rio

[Garii]

we had so many issues with this, I would make changes to invert the motors and they wouldn't seem to deploy. After quite some frustration and alot of matches that didn't go so well, I opted to format the cRIO which did the trick if we did it often

eventually I got everything working normally again

there has been alot of trouble with watchdog since the update as well, and even the boolean feedback nodes had some trouble.

the only way I seemed to get it to work was to
format the cRIO > make edits > Build > Deploy > hope it works

anyways, hopefully this issue is resolved soon

[Greg McKaskle]

You don't mention making that app the startup. As long as you've done this once, and use the same build name, I don't think you need to do it each time, but then again I usually do it, and I've never seen a cRIO not run what I told it. So my only suggestion would be to do a Set as Startup after your deploy and see if that is possibly the reason.

Greg McKaskle

[Garii]

Originally Posted by Greg McKaskle

You don't mention making that app the startup. As long as you've done this once, and use the same build name, I don't think you need to do it each time, but then again I usually do it, and I've never seen a cRIO not run what I told it. So my only suggestion would be to do a Set as Startup after your deploy and see if that is possibly the reason.

Greg McKaskle

When I tried it at FLR it wouldn't work no matter what I did, even deploying twice and such. I've done what you sugessted at least once, and running it in realtime gave me a "no code" on the driver station. Building and deploying is the only solution I could get working.

Any idea what the issue is? I even tried different Driver Stations And cRIOs
anyways the temp solution will work for now

[Joe Ross]

Originally Posted by Garii

When I tried it at FLR it wouldn't work no matter what I did, even deploying twice and such. I've done what you sugessted at least once, and running it in realtime gave me a "no code" on the driver station. Building and deploying is the only solution I could get working.

Did you have a breakpoint set, or highlight execution turned on?

[Garii]

Originally Posted by Joe Ross

Did you have a breakpoint set, or highlight execution turned on?

Nope,
Just the norm

[rokenboker]

in the Project Explorer, there sould be 2 "Build Specifications", one ABOVE the RT CompactRIO Target (10.xx.yy.2), and one BELOW. click the plus to the left of the "Build Specifications" BELOW RT CompactRIO Target (10.xx.yy.2), the right click the Real-Time App (or whatever is there like that), then click "Build", wait for it to "Build", then when that's done, right click again and click "Run As Start-Up". that should "download" the code to the cRIO. during the download proccess, you may get a box with errors, just click "ok" or whatever it says to let you continue, then LABVIEW will ask if you want to reboot the robot, tell it "yes" and wait. goto the Driver account, and have fun.

[Mark McLeod]

This thread is a year old. I think they've figured it out by now...