|
|
|
 In order to change the world and make it a better place we must start with ourselves. - wendymom [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| In order to change the world and make it a better place we must start with ourselves. - wendymom [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#27
11-03-2009, 01:20
|
|||
|
|||
|
Re: Power for Driver Station
What we did with both the camera and WGA was cut the original power supply wires and use 1/4" insulated spade connectors on the ends. Now we can easily use either the original transformer or wiring on the robot. We'll be doing the same to the DS power cord. After FLR we'll be adding a set of wires from a fused port on the Power Board for the DS.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Driver Station S.O.S. | M. Gildner | Electrical | 15 | 28-11-2009 19:35 |
| Driver Station for Autonomous | shrimp | Control System | 5 | 03-03-2009 17:05 |
| Driver Station | dnrobotics11 | Control System | 2 | 18-02-2009 21:35 |
| Driver Station Power at the competition. | Robo640 | FRC Control System | 3 | 13-02-2009 16:59 |
| Reading battery power on Driver station. | Digmaster | Electrical | 8 | 31-01-2009 20:09 |
Threaded Mode