pic: T-Shirt Launcher, still needs a chasis

[artdutra04]

Rule #1 when making air cannons is do not use PVC.

Rule #2 is DO NOT USE PVC.

There are huge safety concerns with PVC, because PVC IS NOT DESIGNED TO HOLD ANY KIND OF COMPRESSED GAS, AND HAS BEEN BANNED BY OSHA FOR USE WITH PRESSURIZED GAS IN INDUSTRY. PVC has the awful tendency to spontaneously explode when pressurized with any kind of gas, even if that pressure is below the maximum pressure stamped on the pipe. (The max pressure rating for PVC is ONLY for liquids, such as water).

On a personal note, one of my friends had a PVC air cannon explode while holding it a few weeks ago. He wasn't even moving, and the air cannon didn't hit anything. He was just standing there, holding the pressurized air cannon, when it spontaneously exploded between his arm and his body. He was very lucky in that the way the shrapnel flew out, nearly all of it missed him. His jacket on that side of his body was not so lucky, and literally was torn to shreds.

Since this air cannon is being shown as for "marketing", it seems like it would most likely be used at public appearances. In order to protect any innocent bystanders from possible exploding PVC shrapnel, I would seriously urge your team to avoid using PVC on the air cannon at all costs.

I don't want to sound negative here, but at the same time I don't want to see people put themselves in dangerous situations.