Team Update 18

[mattd7591]

That was a typo. I meant to say USB ports

[billbo911]

Originally Posted by mattd7591

That was a typo. I meant to say USB ports

Ah, well that makes more sense. On that note, I would agree, but I have to ask, how did you break USB ports. That is the first I have heard of that particular failure.

[mattd7591]

We didn't do anything in particular. They just stopped working. We theorize it became loose like the ethernet ports.

[JimWright949]

Could someone please post a link to a device that is described in the update so I have an idea what to buy.

Thanks in advance,
-Jim

[artdutra04]

Originally Posted by JimWright949

Could someone please post a link to a device that is described in the update so I have an idea what to buy.

Thanks in advance,
-Jim

I just found this:

http://www.shopvsc.com/ProductDetail...QVS-CC712MF-01 and here:
http://www.topmicrousa.com/cc712mf-01.html (same product)

It's a 1 foot long male-to-female RJ45 Ethernet patch cable for $5.55.

[MrForbes]

If you need one very soon, there are female-female RJ45 couplers available at many stores that have network stuff, you could use one with one of the KOP ethernet cables (but not the orange one, which is a crossover and to be used for the camera only).

[Travis Hoffman]

Originally Posted by squirrel

If you need one very soon, there are female-female RJ45 couplers available at many stores that have network stuff, you could use one with one of the KOP ethernet cables (but not the orange one, which is a crossover and to be used for the camera only).

Here's one I bought from L-com: http://www.l-com.com/item.aspx?id=5307

Also: http://www.chiefdelphi.com/forums/sh...9&postcount=15

[McGurky]

We had problems with our 545 motor at the wisconsin regional, now they cleared it up!!