|
Re: Drill Motors!
Posted by ChrisH at 04/09/2001 6:14 PM EST
Engineer on team #330, Beach 'Bots, from Hope Chapel Academy and NASA JPL, J & F Machine, Raytheon, et al.
In Reply to: Drill Motors!
Posted by Anne Bergeron on 04/09/2001 3:25 PM EST:
: Is there a team out there that has an extra drill motor that they would be willing to send to Atlanta? We blew ours during the Nats. We were able to borrow one during the competition but had to give it back. We have lots of presentations that are scheduled and coming up real soon so we need to get our hands on one. Thanks in advance.
You can obtain them from your local Bosch distributor.
By the way what was the failure mode? Did you break gears or transmission? or did you overheat the motor itself? I'm playing around with a new transmission idea and don't have a good way to evaluate the new design on the detail level, like gear tooth size. However looking at failures can give me a good idea of whether or not I'm on the right track.
Chris Husmann
Team 330 the Beach'Bots
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|