2009 Gigapan of Finals

[AcesJames]

Very nice quality pan. I see myself at the other side of the arena, under the overhang where it's pretty dark, and the image is still pretty clear.

It really took 3 hours to stitch? With a quad and 8 GB ram it should be pretty smooth. What are you running for clocks on it, and on what motherboard? (Sorry for thread derail, but im curious )

At any rate, real neat gigapan

[Chris Fultz]

This is awesome. I was able to zoom in on our team, and find our two students sitting in the awards section!

Incredible.

[AlexD744]

Okay so I found myself in the picture of the pits but not this one. And I was in the awards section. O well. And this is really really nice.

[Shelabot]

That deserves my worship. The photo is amazing on so many levels! The entire Blue Cheese team is on there (luckily)!

[DonRotolo]

Awesome. Simply awesome. Literally.

[dlavery]

Here is a quick stitching of one of the Gigapans that I shot from the back of Einstein during the competition finals.


(click on the image to link to the full Gigapan)

There is a lot of work still to be done with this image to pull out some of the blurred people and replace them with the clean sections of overlap areas, and balance out the colors. But this is a good first indication of what the final image will look like.

The image has small sections of significant blurring where people were moving rapidly while the sub-images were being acquired. Due to the uneven light coverage inside the Georgia Dome, I was shooting with a 1/8-second shutter speed (Canon G-10 at f4.5, full optical zoom, no digital zoom). This was slow enough to catch considerable movement in each frame. I shot the panorama four times, and have enough duplicate frames to clean up the blurred areas with a little bit of work.

-dave



.

[TotalChaos]

Looks great Dave! I love it! Way better than mine, especially in terms of image consistency, and a great camera angle. I've already started snapping away taking snapshots of people I recognize that go on ChiefDelphi. (Hope you don't mind)

And Frank, I'm glad to see you got this up right away, I was just about to email you when I saw this thread. It looks great! And it makes me wish I would've taken full advantage of my camera's optical zoom in mine. Oh well, next time!


- Austin

[Frank Neuperger]

Austin,

Yes, for max zoomability in the in the pano, I generally go to the max optical on the camera. There are caveats however. For still subjects, zoom to max, but for crowds that are moving like this one, if you zoom too tight, you can end up with a ton of rework if you want to minimize motion artifacts of missing legs heads etc. The frequency of occurrence of these artifacts goes up as you zoom tighter simply because there are more frames (stitch boundaries) for a given size pano. Notice the right hand side of my image in the first posted pano as the subjects were closer. The stitching really chopped some of those people up because they were large in comparison to the frame and they were not sitting still.

Mechanically the Beta gigapan is so so. Ok for a light point and shoot. Because of the crush of trying to be competitive in ATL, I did not have the time to better integrate the camera with the Gigapan to ensure that the camera c of g was always on one side of the tilt axis for all angles of tilt. As such I got vertical smearing on some images. The shutter servo induced flex due to use of that small plastic spacer instead of the big aluminum spacer.

Also, I did not really fully test the delays associated with my auto focus to see if the gigapan was actuating the shutter before the autofocus settled. . To get great panos, you have to characterize all of the idiosyncrasies of your camera in the context of the Gigapan mechanism. .

I am going to add a bearing support on the STBD side of the Gigapan and remake the camera and shutter servo mounting plate out of 1/8 wall plate or extrusion to get it really rigid. This should also help the tilt axis "stiction" get a bit more deterministic.

After having to build that swerve steered drive for 09 , this will be a snap!!

Having a remote control (even if wired) to pause it for people to walk past would be another great addition. I hate having to touch it in case I push too hard an make the stepper slip. Not sure how to do this. Need to check if the code is open source and if there is some I/O left on the board.

[Frank Neuperger]

Great shot of Team 39

http://www.gigapan.org/viewGigapan.p...pshot_id=65908

[Frank Neuperger]

James,

q8300 quad core at 2.5 GHz. 8 Gbytes 1366 MHz DDR3 memory.

It is an iBuypower machine. Forgot the mother board. I think the bus is 1600 MHz capable. Too bad the stitcher does not use the 64 core NVIDIA graphics card.

I am looking into setting up a Ramdrive to do the stitching as I think I am bottle-necked at the I/O to the disk. It never gets above 35% average on CPU even when I elevate task priority.

Frank