|
That all depends...
Posted by Carolyn Duncan at 05/16/2001 3:58 PM EST
Student on team #495, The Pack, from Jamestown High School and VBEP/Raytheon/Saic.
In Reply to: How important is a machine shop?
Posted by bill whitley on 05/15/2001 4:34 PM EST:
It all depends on the people you have on the team. Team 495 had 1 band saw, 1 drill press, and many hand tools. If the people on your team are unwilling to use hand tolls or work a little harder to do something beacuse you don't have the tools to make it easy, you've got a problem. We had VERY limited access to William and Mary's equipment, we had one welded piece on the robot which was not a key part. The biggest difference tool availability makes is what material you use to build. Our robot was a wooden platform with a metal frame and manipulators. The metal was easy to cut through with a hand saw. The bottom line is you make do with what you have or you don't do.
C-ya,
Carolyn
__________________
This message was archived from an earlier forum system. Some information may have been left out. Start new discussion in the current forums, and refer back to these threads when necessary.
|
I can't wait until IFI starts their FRC sized competition and quickly overtakes FRC. - AdamHeard [more] 
Similar Threads
Hybrid Mode
