Gyro Problem

[slade2000]

Hi

I am new to all this so any help will be good.

What im doing is im building a camera stabilizer. Ok all works good but there are a small problem with the gyro. What it does it compensates more to the one side than the other. Basicly what i mean by this is. Lets say i move the rig to the left at a 45 deg angle it will keep the camera level but if i move it to the right at a 45 deg angle it wons move the servo completely to where it should be to be level. this result in when i return it to 0 deg it is not level as well.

What can this be?

I use Futabu remote and servo and E-sky ek2-0704 gyro.

Tnx Allot