pic: 1323 Thinks Pink

[Akash Rastogi]

Originally Posted by sgreco

The weight is impressive, especially given 4 motors and a 2 stage tranny. I'm liking the wood too. I'm guesssing the 2 stage transmissions are custom too, Have you potsed them on CD? If not please do, they look nice.



I hope your not stealing my teams plan for a bamboo robot...

We might not be posting them up until after build. But if you'd like to see them please PM.

[sdcantrell56]

Looks sick man. I definitely love your renders. Glad I could have a bit of an influence on you, and I love your implementation of the EWCP transmission.

[AndyB]

Very nice render. Background could use some work, everything else looks great though.

I'm assuming the crossbars in the front and back are just welded on.

I'm also assuming the support rails would run across the middle? What did you have in mind for those, just a couple 2x1 extrusions welded in place?

What prompted you to put both the trannies and the battery in the very back?

[R.C.]

Originally Posted by AndyB

Very nice render. Background could use some work, everything else looks great though.

I'm assuming the crossbars in the front and back are just welded on.

I'm also assuming the support rails would run across the middle? What did you have in mind for those, just a couple 2x1 extrusions welded in place?

What prompted you to put both the trannies and the battery in the very back?

Nice to hear from you Andy. The crossbars are welded on and pretty much our frame will be welded as it has been for the past 4 years. You nailed the extrusion part right:

-one in the back and front
-one in the middle maybe two

The reason for the trannies in the back along with the battery is because if you look closely enough at the center wheel. There is an arc bolt pattern that I've CNC'd into the rail. (The add on plate is not shown, I forgot to add it on). We used that pattern this year and it works great (even with the slippery surface for a 1/16 drop). You can adjust the drop between a no drop or a 1/4 inch, 1/16th increments. So I put the trannies in the back with a direct drive. The battery is in the back because I don't have anything to put on top.

It depends, If the game or design I was making was a forklift, the battery would be fine. But If it was something that extruded beyone the frame like an arm. I may move it a bit forward. It all depends.

Here's a pic of A wood DriveTrain made my Team 418, just to show the use of wood:

http://www.chiefdelphi.com/media/photos/31598

-RC

[AdamHeard]

If the wood is rigidly attached to the frame along it's length, you could probably get away with no internal cross members.

Also, You appear to be using 6" wheels, which is fne; but I think you could save a substantial amount of weight by going smaller (and keep the same ground clearance by shifting the wheels down).

For season, I'd ditch the adjustable center drop and go with a value you know works, saves some parts and weight.

[Scott Morgan]

Originally Posted by AdamHeard

If the wood is rigidly attached to the frame along it's length, you could probably get away with no internal cross members.

I was thinking the same thing. I don't think Pink uses any cross internal members on their robots.

[Cory]

Originally Posted by Scott Morgan

I was thinking the same thing. I don't think Pink uses any cross internal members on their robots.

They use their belly pan as their cross bracing.

[MrForbes]

Looks good, just replace all that blue stuff with brown stuff and you'll be done!

(with a lot of redesign)

[Aren_Hill]

Im really waiting for you guys (1726) to start incorporating bamboo, you've taken on being the naturalists of FIRST

[MrForbes]

If bamboo were available at the local Ace hardware store....

they have 5'x5' sheets of Baltic Birch in 1/4, 1/2 and 3/4 thicknesses

[IBdrummer]

I would've thought it was one of ours if it was pink