|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
VEX Power Expander
The VEX Power Expander is now available: http://www.vexrobotics.com/vex-power-expander.shtml and http://www.vexforum.com/wiki/index.php/Power_Expander. This allows builders to use two batteries for one controller, and reduces the power draw on that controller. From the product description:
* Attach a 2nd battery to your robot o Power up to four (4) Motors or Servos o Reduce motor load on primary battery o Run your robot for longer! * Protected by an Internal Circuit Breaker * Status port provides feedback to Microcontroller o Record when your robot trips its breaker o Measure battery voltage * Feedback LED shows battery and circuit breaker status * PWM Slide Lock keeps cables from coming unplugged |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Power distribution board does not give power to access point | bitsoglass | NI LabVIEW | 3 | 17-02-2009 12:07 |
| pic: Vex power from FRC battery | MrForbes | Extra Discussion | 8 | 01-10-2007 11:35 |
| Y-Splitter for VEX power pack | Chuck Glick | VEX | 0 | 19-10-2006 15:04 |
| Vex Announcement: FIRST Vex Challenge Extended for 2006-2007 | KathieK | FIRST Tech Challenge | 14 | 30-07-2006 23:42 |
| Stuffit Expander and MacHTTP | sanddrag | IT / Communications | 3 | 26-09-2004 21:07 |