|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: pic: Wild Swerve Module, Near Production
Quote:
All ratios start with a 14 tooth CIM gear to a 35 tooth .375" hex gear. The remaining gears can be any that follow the Toughbox spread of 64 teeth max. There are many ratios possible, the four most relevant using the CIM are as follows: 14.8:1 or about 4.8 ft/sec at max power 9.87:1 or about 7.2 ft/sec at max power 6.94:1 or about 10.36 ft/sec at max power 5.36:1 or about 13.4 ft/sec at max power |
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| pic: Team 221 LLC. - Wild Swerve Module | ajlapp | Extra Discussion | 77 | 06-11-2009 17:33 |
| pic: Swerve Module Concept (View 2) | Dave McLaughlin | Extra Discussion | 5 | 17-06-2009 00:15 |
| pic: stangs swerve module | Aren_Hill | Extra Discussion | 8 | 23-04-2007 08:15 |
| pic: Swerve! (Module) | =Martin=Taylor= | Extra Discussion | 13 | 09-07-2006 19:57 |