|
|
|
 It is critical to our continued growth and success to recognize, and to make others realize, THERE ARE NO OPPONENTS. - Taylor [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| It is critical to our continued growth and success to recognize, and to make others realize, THERE ARE NO OPPONENTS. - Taylor [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Autodesk - .stp file to .iam
So I wanted an autodesk assembly file of the AM shifter, and I found this thread:
http://www.chiefdelphi.com/forums/sh...ter+autode sk I would have posted there, but it's closed. So, here's the problem. I followed the instructions, and I opened the .stp file, and it worked. As the old post said, nothing was constrained, but I grounded everything and saved it as a .iam file. This all worked fine, but when I placed the AM Shifter assembly into another assembly, after i constrained it down, Autodesk froze. I did this two more times and the same thing happened. I've had autodesk 2009 freeze a couple of times over the year that I've had it, but never 3 times in a row, so I guessing it has something to do with the converted .stp file. Anyone have this problem? Any ideas? Thanks, -Seth 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Autodesk Inventor Design Competition: File naming | pmax | Inventor | 2 | 08-01-2009 12:04 |
| IGES and STP file modification | TomBW | CAD | 3 | 31-01-2008 15:11 |
| How to use the data obtain in one C file to another C file? | tommy_chai | Programming | 8 | 11-01-2008 02:17 |
| Help! making an inventor file into an autodesk file | kjhobin | Inventor | 5 | 19-03-2006 23:04 |
| Autodesk Inventor -> 3ds Max (File Format) | Adrian Wong | Inventor | 1 | 22-01-2002 23:06 |
Threaded Mode