|
|
|
 Blowing out the transmission on your mini-van while hauling a trailer 700 miles from home is not fun. Trust me on this. - dlavery [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Blowing out the transmission on your mini-van while hauling a trailer 700 miles from home is not fun. Trust me on this. - dlavery [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
[FTC]: Labview and teleoperated
Hi!
We are a rookie team and have been learning Labview for the first time. We are having problems with getting the robot to respond to the game controllers. I was whoping someone might be able to offers some help. We are using the NI getting started book. We successfully build the robot ran the mechanic.vi program and the robot resonded correctly. We moved on to Chapter 4 (FTC controller station) and got the controller software to recognize the game contollers. When the buttons were pressed the program correctly recognized the which button was pressed. When we went to run the program in teleoperated mode the robot did not move or indicate it was getting commands from the game controllers. We tried following the direction several times and have not been able to figure out what we are doing wrong. Any suggestions would be helpful. Thanks 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [FTC]: Bluetooth Problem with LabView/FTC Controller Station | James Dowd | FIRST Tech Challenge | 8 | 27-10-2009 10:40 |
| Autonomous and Teleoperated | Technic-R-C | General Forum | 8 | 15-02-2009 16:04 |
| Autonomous and Teleoperated | Technic-R-C | NI LabVIEW | 2 | 06-02-2009 22:19 |
| [FTC]: First problem with FTC and LabView.....? | PhilBot | FIRST Tech Challenge | 5 | 07-11-2008 10:36 |
| First problems with FTC and Labview | PhilBot | National Instruments LabVIEW and Data Acquisition | 0 | 10-09-2008 20:21 |
Threaded Mode