[FTC]: Need BlueTooth Help

[af4ex]

[I posted this originally under 'Programming' but didn't get much response (maybe wrong forum for this problem) so trying again here.]

We cannot connect to our brick via BlueTooth using RobotC 1.93. USB connect works OK and we can download the new Firmware 7.83 OK. But when we try to connect via BT, we get error message "No 'NXT' bricks could be found" immediately after the Passkey Enabling. Deleting the connection in the BT Devices list and starting over doesn't help. We've tried this on 3 different computers with same results.

We had no problems at all with the previous RobotC 1.4 using the same BT and brick. In fact, the problem started immediately after we switched to 1.93 two weeks ago (we got a late start this season, our second year).

We're starting to suspect a software bug in RobotC 1.93. Has anyone else had a similar problem? Can anyone suggest a fix?

Thanks,

[af4ex]

Connect problem has been solved. Seems to have been a bad NXT brick. We located another brick and, using the same BT and computer, it connected perfectly on the first try, without giving us the dreaded "No bricks could be found" message.

Will try to get the old brick replaced under warranty.