|
|
|
| Just the sight of you makes my vision system go haywire. |
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
<R07> F -source for bumper fabric?
Anyone know what color code and where you can buy fabric that meets the rule for "corresponding color in the FIRST logo"?
|
|
#2
|
||||
|
||||
|
Re: <R07> F -source for bumper fabric?
Is your goal to exactly match the colors on the FIRST logo? I think that would be going a bit too far in pursuit of following the rules.
<R07> states the red and blue colors must be as close to solid red and blue as reasonable Quote:
![]() Anyway, I'll leave it up to a future poster to communicate the color codes and where to get fabric. <R07> part E says it should be "1000 dernier Cordura Plus®" fabric. I'll ask my coach where we ordered our fabric in the past years. |
|
#3
|
|||||
|
|||||
|
Re: <R07> F -source for bumper fabric?
We have ordered bumper fabric from Seattle Fabrics since 2006:
http://www.seattlefabrics.com/nylons.html#fc1 Colors we believe are the closest colors to FIRST are: #1500 – Red #4345 – Mariner Blue http://www.seattlefabrics.com/nylons.html#fc1 |
|
#4
|
|||||
|
|||||
|
Re: <R07> F -source for bumper fabric?
Based on the logo guidelines, they specifiy the exact color schemes for the logo.
They are on page 18. |
|
#5
|
|||||
|
|||||
|
Re: <R07> F -source for bumper fabric?
Quote:
We used denim last year, and the only time we had a problem was off the field when the students tried to push the robot (27" wide) with bumpers (an additional 6.5" width) through a 30" doorway. ![]() |
|
#6
|
|||||
|
|||||
|
Re: <R07> F -source for bumper fabric?
We've used AH&H before: http://www.ahh.biz/
|
|
#7
|
||||
|
||||
|
Re: <R07> F -source for bumper fabric?
Red and Blue Bumpers.
These bumpers from Andymark look like the proper color. I don't see an area where you can buy just the fabric. |
|
#8
|
|||
|
|||
|
Re: <R07> F -source for bumper fabric?
Quote:
|
|
#9
|
|||
|
|||
|
Re: <R07> F -source for bumper fabric?
Those of you who have used AH&H, do you recall or can you look up what specific colors (by their names) you have used? On-screen I'd say "mariner blue" and "barn red" look closest, but I'd love to hear from someone who's seen the actual fabric. Thanks.
|
|
#10
|
|||||
|
|||||
|
Re: <R07> F -source for bumper fabric?
We used yellow and black in the past, so have no experience with red or blue.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Your opinion: does our mesh violate rule R07?? | RoboMaster | Rules/Strategy | 9 | 16-02-2009 18:46 |
| Fabric for trailor | yodameister | Technical Discussion | 2 | 14-01-2009 11:14 |
| Cordura fabric | vannade | General Forum | 0 | 10-01-2009 10:02 |
| Source for Vision Target Fabric | DanDon | General Forum | 7 | 03-01-2009 18:24 |
| Source for pushbuttons | Bob Steele | Electrical | 10 | 07-02-2008 12:23 |