Robot Self-Inspection Process

[Diana Gee]

FIRST WAshington (www.firstwa.org) is starting to make steps to reduce the amount of time it takes to get through the Robot Inspection Process. By having a Regional with 66 Robot Teams to inspect we needed a process that would help reduce the overall flow for Robot Inspections. So we are kicking-off Teams Robot Self-Inspections.

Here is the basic layout and process we are using, keep in mind this is the first time we have done this so we might have some speed bumps along the way.

Each Team identifies a Team member as the Team Robot Self-Inspector. Their basic job will be to coordinate with the Regional Lead Robot Inspector (or Regional designated Robot Inspector) via Facebook, Regional Website, directly through email or a communications page and conduct the Teams Robot Inspection prior to shipment. They fill out a preliminary Checklist that is currently posted on the communication page to assure their Team has built a Robot that meets the FIRST FRC requiremnents. Prior to shipment the Team Robot Self-Inspector will fill-out the final checklist and put into the shipping container with the Robot or Email it to the desigated Robot Inspector (detail still in work) for the initial Regional they are attending. Once at the Regional the Regional Inspectors will conduct the Formal Inspections with the Teams checklist as a guide; with the Team Robot Self-Inspector as his Contact.

What this new process should do is reduce the number of non-compliant robots found during the Regional inspections and also help Rookie Teams to build a compliant Robot; with help from their Veteran Teams.

See attached Job Description.
Team Robot Inspector_JobDesc.doc

What is your Opinion on this new Process?

Thanks-
Darin Gee (aka Diana Gee - My Wife)
FIRSTWAshington Lead Robot Inspector
robotinspector@firstwa.org