|
|
|
 After each match the pit crew gathers up the parts from the field and finds a new and interesting way to assemble them. - tsaksa [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| After each match the pit crew gathers up the parts from the field and finds a new and interesting way to assemble them. - tsaksa [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Is this possible in LabView?(Setting Pressure)
This is a more of a "Is this possible?" thread. My team has drawn up a plan for a kicking device. They want it to have three pressure settings and to have that pressure set by pushing an assigned button. The three settings would be like a low, medium, and high pressure. My question is: Is this possible to do in labview? It would be 3 buttons that would set the pressure to low,medium,and high. The pressure would also have to back forth from like high to medium back to high. If it is possible, how would I go about starting this code? Thanks!
Edit : if three pressures can't be set, can three "positions" be set to stop at or some other way? Last edited by Dustin Shadbolt : 11-01-2010 at 22:34. 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| POSSIBLE LABVIEW BUG | EncodersRUS | NI LabVIEW | 1 | 11-01-2010 23:22 |
| Does the Norgren Pressure Regulator show working pressure or stored pressure? | Madison | Pneumatics | 7 | 14-02-2008 17:40 |
| Is this possible? (Gears and chains) | TJ4nier | Technical Discussion | 7 | 20-01-2007 23:06 |
| Is this possible? | WhiteTiger | Control System | 2 | 08-02-2005 16:53 |
| TI Pressure Sensor this year? | kmcclary | Pneumatics | 1 | 20-01-2005 20:53 |
Threaded Mode