You know what would be cool? A pneumatics Manual.

[IndySam]

Originally Posted by squirrel

The rules say you can use anything, and the Pneumatics Manual is not part of the rules (as I understand it with my feeble lawyer mind).

I understand your hesitance...how could it be possible that they could make it so easy to select parts for the robot?

I know, so many years of severe restriction I just find it hard to believe they would leave it so wide open.

[Jones571]

Originally Posted by IndySam

I know, so many years of severe restriction I just find it hard to believe they would leave it so wide open.

I do like the idea of finally being able to use spring return pistons .. Still i think your right we will wait for them to publish the manual before we place our cylinder orders

[Aren_Hill]

Originally Posted by IndySam

I know, so many years of severe restriction I just find it hard to believe they would leave it so wide open.

We used a few spring return cylinders last year from mcmaster under the new open rules for the pneumatics section, so I need to compare the two manuals but it sounds like we're allowed to use what we want again.(to the 2" bore x24" long rules obviously)

[Daniel_LaFleur]

Is the order sheet for cylinders somewhere? or is it in the pneumatics manual?

[IndySam]

Originally Posted by Daniel_LaFleur

Is the order sheet for cylinders somewhere? or is it in the pneumatics manual?

Go to bimba.com. There is a link on their home page.

[IndySam]

Originally Posted by Aren_Hill

We used a few spring return cylinders last year from mcmaster under the new open rules for the pneumatics section, so I need to compare the two manuals but it sounds like we're allowed to use what we want again.

We didn't use pneumatics last year for the first time in years so I didn't spend a lot of time reading that section. I didn't know they were so wide open. Thanks guys, good to know.

[Aren_Hill]

Last year was our first year with pneumatics and it was a good year to start, so open and free

[MrForbes]

Last year was our first without pneumatics, so we also missed out on the new policy.