|
|
|
| Honey, will you tether your soul to mine? |
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools |
Rating:
|
Display Modes |
|
#16
|
||||
|
||||
|
Re: Suction as a method for possessing balls
well i believe that it is legal...the only problem i would really have is trying to get it past the bumps if the robot cant fit through the tunnel, isnt it a penalty for a robot picking up a ball?
|
|
#17
|
||||
|
||||
|
Re: Suction as a method for possessing balls
As long as the ball stays on the ground it is considered POSSESION which is perfectly legal. If the ball comes off the ground that is considered HOLDING which is a penalty.
|
|
#18
|
||||
|
||||
|
Re: Suction as a method for possessing balls
Quote:
Any ball OFF the ground and in possession would be CARRIED... that is a penalty. Carrying can occur ANYWHERE on the robot... the key is that the ball MUST stay in contact with the ground. Any vacuum system would have to be designed to keep the ball on the ground... |
|
#19
|
||||
|
||||
|
Re: Suction as a method for possessing balls
So a robot that is controlling a ball via suction goes over a bump. At some point, that ball is going to lose contact with the ground. Would this be a carry?
edit: I realize this should be an official Q&A but I'd like to see what you fine folks think. |
|
#20
|
||||
|
||||
|
Re: Suction as a method for possessing balls
How would this not be a penalty? The rules explicitly state you cant be in control of a ball thats not in contact with the ground.
|
|
#21
|
|||||
|
|||||
|
Re: Suction as a method for possessing balls
It's not intentional, and probably momentary. It's like having the ball bounce off your hand in soccer--the refs probably won't call that, especially if you don't make any move to control the ball or your hand is against your body, but they can if they think it's intentional on your part.
Yes, definitely one for Q&A. |
|
#22
|
||||
|
||||
|
Re: Suction as a method for possessing balls
Quote:
|
|
#23
|
||||
|
||||
|
Re: Suction as a method for possessing balls
in overdrive 1986 (Team Titanium) used a suction cup to move the track balls, it worked extremely well compared to initial thoughts.
|
|
#24
|
||||
|
||||
|
Re: Suction as a method for possessing balls
Suction... hadnt thought about that yet but it seems fun!
to answer the bump problem... as long as the vaccuum suction is turned off when you go over the bump so its not holding the ball would it still be possession if it "happened" to go over the bump with you even tho you had no hold on it at that time? i will put this idea to my team tho >.> |
|
#25
|
||||
|
||||
|
Re: Suction as a method for possessing balls
Suction may work, but it seem that the ball needs to drag on the ground, and not roll.
|
|
#26
|
||||
|
||||
|
Re: Suction as a method for possessing balls
I don't see why using a suction method would be illegal. But like others have said, it doesn't seem like it would be the most efficient way to hold a ball.
|
|
#27
|
||||
|
||||
|
Re: Suction as a method for possessing balls
My team has been considering this option, and our tests with a shop vac proved sufficient for further investigation. But what to use for suction? I guess I would use a house vacuum's fan attached to a Fisher Price motor?
|
|
#28
|
|||||
|
|||||
|
Re: Suction as a method for possessing balls
At least the field includes the bumps. If you can manage to keep the ball in contact with the carpet, no penalty. But I bet that ends up being difficult.
Quote:
|
|
#29
|
||||
|
||||
|
Re: Suction as a method for possessing balls
we tried this method today with success, it was able to hold the ball as it slid along the carpet. it is a viable option for maintaining control.
good luck all! -Rich Little |
|
#30
|
||||
|
||||
|
Re: Suction as a method for possessing balls
dude epic win XD were gonna post the video on youtube, it was strong, but as said, if the ball comes off the ground when going over a ramp it will be considered a penalty...which is why they have the tunnels XD and if a team was smart ehy would have a piston or some sort of way to hit the ball...
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Orbit Balls - For Sale | Pelicano234 | General Forum | 53 | 02-02-2009 23:47 |
| Alternative Method for calculating “I” term in PID | Holtzman | Programming | 15 | 06-09-2006 13:22 |
| Balls for the game | K.Shaw | General Forum | 1 | 20-01-2004 17:59 |
| What is your favorite method for attaching gears to shafts? | archiver | 2001 | 13 | 24-06-2002 04:00 |
| adhesive for grabbing balls | archiver | 2001 | 1 | 23-06-2002 22:40 |