|
|
|
 Capability and willingness are two very different things. Anybody can dance, though you could spend your lifetime unsuccessfully trying to convince them of that. - Mr. Pockets [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#6
13-01-2010, 07:07
|
|||
|
|||
|
Re: Problem with Default Program/Deploy
It sounds like your program is running, just not as desired.
My recommendation would be to open up an example program and run it. If it runs, there is no problem with the cRIO, image, or network. Some of the examples use joysticks, and they can also be used to test those connections and configurations. As a bonus, if they work and your program doesn't, it gives you something to experiment with to discover the cause. If you want to post code or a picture of your diagram, we may be able to spot the issue as well. Greg McKaskle 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help to Deploy a Program in Labview. | Delian | NI LabVIEW | 7 | 10-12-2008 21:13 |
| PWM Problem with Default Code | kbregler | Programming | 16 | 03-02-2007 15:14 |
| Problem with program uploading | 1573 | Programming | 49 | 28-01-2007 13:51 |
| problem with the default code | MarkVH | Programming | 7 | 28-01-2005 00:04 |
| Problem with FRC Default code | AsimC | Programming | 2 | 11-01-2004 19:22 |
Threaded Mode