[Help Needed] Setting up WindRiver - Step by Step

[basicxman]

Originally Posted by davidalln

It sounds like you're trying to run the code in debug mode rather than burn it to the cRio. If you run it through debug, then the code will be on the RAM but will not stay on once you turn off the cRio. Try running FIRST->Download when connected to the cRio in Windriver (although burning code through FIRST->Download hasn't been working for out team either... but that's another issue entirely)

>> We've tried both methods, FIRST->Download (and of course setting the right option in Window->Preferences->FIRST Downloader...

Originally Posted by davidalln

Also, did you install the update for the driver station according to the following post: http://www.chiefdelphi.com/forums/sh...9&postcount=44

>> We did not install it in that order as far as I know, on Monday we'll try this approach.

Originally Posted by davidalln

Finally, how do you have your connections set up? Are you directly connected to the cRio by ethernet, through the gaming adapter, or through the wireless bridge?

>> We've been imaging it via ethernet and programming via the wireless setup. We are pretty certain that the connections are set up correctly, the IP's are correct and we're getting a connected status under the Remote Target