|
|
|
 Part of the magic of FIRST is the interaction between different teams- and that becomes clear as day as the clock starts ticking. - mhayon [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Part of the magic of FIRST is the interaction between different teams- and that becomes clear as day as the clock starts ticking. - mhayon [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Problem Switching Between Modes | Powerhawks Team 1111
Hello, this is Michael from the GS IPT South River Powerhawks Team 1111,
We have gone through the second section of the manual completely and have been successful in uploading and running code (C++) to the cRIO. However, in order to run the code we must stay in teleoperated because when we switch to autonomous mode it runs the autonomous code correctly but does not allow us to switch back to teleoperated. tl;dr After switching to autonomous we can't switch back (we select teleoperated but autonomous code continues to run). Thanks. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Switching between Autonomous and Teleoperated | Technic-R-C | National Instruments LabVIEW and Data Acquisition | 3 | 07-02-2009 08:55 |
| Toggling between modes | csshakka | NI LabVIEW | 3 | 02-02-2009 20:47 |
| Switching between Hybrid and User-Controlled | Zyklon | Programming | 3 | 13-02-2008 08:30 |
| Question about switching autonomous modes | DemonYawgmoth | Programming | 2 | 23-03-2005 17:02 |
| switching modes | Allison | Programming | 8 | 06-04-2004 13:37 |
Threaded Mode