[Help Needed] Setting up WindRiver - Step by Step

[basicxman]

Originally Posted by Mike Copioli

1. When in doubt reboot the cRIO and or Windriver.
2. When unsure if you have com PING everything and perform an IPCONFIG.
3. Right click the project and select Rebuild or clean build.
4. Ensure that you have the correct .out file and team number WINDOW->PREFERENCES->FIRST DOWN LOADER PREFERENCES
5. After building a project you need to check the Build Console and ensure that the .out file built for your current project.

Unfortunately we have tried all of this to no success. Thanks for your advice, hopefully tomorrows debug logs will help.

[basicxman]

Turns out we don't have an RS232-USB adapter here to run diagnostic logs. Will get back to you guys anytime - any other suggestions?

Can somebody outline the proper method of creating a new project so we're sure? We seem to be able to get the SimpleTemplate on there

[byteit101]

Originally Posted by basicxman

Can somebody outline the proper method of creating a new project so we're sure? We seem to be able to get the SimpleTemplate on there

Its in http://first.wpi.edu/Images/CMS/Firs...artedWithC.pdf

but breifly File>New>Example Select middle one, FRC Simple Template. then Modify the code in the main cpp file (MyRobot.cpp) to do what you want it to. look at the above PDF for details

[basicxman]

Originally Posted by byteit101

Its in http://first.wpi.edu/Images/CMS/Firs...artedWithC.pdf

but breifly File>New>Example Select middle one, FRC Simple Template. then Modify the code in the main cpp file (MyRobot.cpp) to do what you want it to. look at the above PDF for details

We've known about this way, but we wanted something a little more use of orthogonality.

Anyways, we've now created a guide on proper project creation that builds.

We fixed the previous errors, an update was not properly installed on the classmate causing problems. The real error? Team communication. Anyways, thanks for everyone's help!