|
|
|
 What I learned from week-1 is that once again my son has been inspired to the level that he came home after the BAE Systems Granite State FIRST Robotics Regional Competition with the biggest smile I have seen on his face for a long long time. I am truly grateful for that. - FIRST_Parent [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
18-01-2010, 20:48
|
|||
|
|||
|
Re: Solenoid Control Valve Question
It may be helpful to move the solenoid valve up close to the inlet port and have the air storage tank directly before the solenoid. Also, try using an open return port and use a rubberband to return the cylinder. Use a single solenoid or close off the ports on the double. Using a smaller diameter cylinder will increase the velocity of the actuation and using an open exhaust port allows for the freeflow of air on actuation. Hope this helps.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Single vs double solenoid valve operation | Scott358 | Pneumatics | 0 | 29-01-2005 11:47 |
| SMC Double Solenoid Valve Assembly | Dave Kempskie | Pneumatics | 0 | 29-01-2003 13:34 |
| Will trade for double solenoid valve | archiver | 2001 | 2 | 24-06-2002 00:33 |
| Dismantle Solenoid valve? | archiver | 2001 | 2 | 23-06-2002 23:34 |
| Single Solenoid Valve SMC | Chubtoad | Technical Discussion | 3 | 20-01-2002 15:16 |
Threaded Mode