Downloading code: Netbeans does not reset cRIO

[cal3d]

Make sure that your netmask is set correctly. We had this problem also, changing the netmask to the correct 255.0.0.0 fixed it.

[FRC4ME]

Originally Posted by cal3d

Make sure that your netmask is set correctly. We had this problem also, changing the netmask to the correct 255.0.0.0 fixed it.

Hmm...that might explain it. My team has found that any computer with a static IP will download, while a computer using DHCP will not. This doesn't make sense, unless you consider that the router suggests a subnet mask of 255.255.255.0 rather than 255.0.0.0.

[greekgod8591]

I have the same issue. When I hit the build and run button my output line hangs on "set up for Run" It works when I reboot via the cRIO but I still want debug code. Any other ideas other than resetting the IP and checking the subnet mask?

[greekgod8591]

Okay, so after great searching of forums and googling, I have finally found one solution to the setting up for run issue. It turns out the windows firewall seems to have been blocking communication back from the cRIO resulting in the disruption. So, if you have this issue and setting a static IP didn't help, try turning off the windows firewall. It worked for us.
-2577

[Kingofl337]

We are also seeing this issue, and we had to run a cable from the laptop to the router. I never had a issue before this build of squawk.