Frame

[Dodge it Ram it]

my thought is if u can reduce the chance of tipping it worth the time to look into it, hitting it at any angle greatly increase the the bot to flip

[Jared Russell]

Just be careful when using a suspension on wheels that are powered by chain - if there is too much play in the suspension and the chain is stationary on the other end, you can end up messing up your tension when you hit a bump (in the worst case, you could even throw a chain).

[Dodge it Ram it]

true but i have that all figured out

[JHSmentor]

Originally Posted by Dodge it Ram it

my thought is if u can reduce the chance of tipping it worth the time to look into it, hitting it at any angle greatly increase the the bot to flip

depending on how it works and when, you could actually increase your chance of tipping by causing a sudden shift in the robots center of gravity. of course, this is something you could flush out through testing.

[Mr_I]

You would probably be best served by applying all the technical know-how you've got to keeping the Center of Gravity (CoG) as low and centrally located as possible. The benefits of this will probably far exceed those of a fancy suspension, especially one that you aren't actually constructing right now.

[DonRotolo]

Originally Posted by squirrel

I respectfully disagree, Don. The Model T suspension is not what we would consider optimum for handling on today's roads, but it was great for the conditions of the time. It has a lot of travel, and it's a simple, reliable design.

OK, but the one time I rode in one, my teeth came loose - and the road was not all that bad.

The lesson here is that I should not base my entire opinion on a single data point.

[Dick Linn]

How about pneumatic tires (aside from perhaps having too much traction)?