|
|
|
 PLIERS: Used to round off bolt heads. - Andy A. [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| PLIERS: Used to round off bolt heads. - Andy A. [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
cRIO random connection failure
Our team uses a cRIO from last year, which should be the same as they have this year. Our software and firmwares are all updated to the latest version. Today, we flashed the cRIO because our laptops were not connecting to it last night, and it connected once and deployed code just fine. But we turned the robot off and when we deployed code the second time, it no longer connects. Same thing happened last night: works some of the time after we power cycle everything but mostly refuses to connect. How would we fix this?
Our configurations: Laptop IP: 10.30.70.6 Wireless Router IP: 10.30.70.4 (gateway) Robot Wifi IP: 10.30.70.1 cRIO IP: 10.30.70.2 Setup: Laptop-(eth)->Router-(wifi)->Robot Wifi-->cRIO Testing results: ping 10.30.70.6: pinging localhost works ping 10.30.70.4: connects to router fine ping 10.30.70.1 or 2: request timed out Driver Station Output: "No Robot Communication" 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Windriver connection to cRio | avolkov | Programming | 6 | 05-05-2009 08:40 |
| cRio keeps on staying red on the lab view connection test | bio hazard | Programming | 1 | 14-02-2009 19:45 |
| Connection with cRIO | nadavsen2 | Programming | 4 | 29-01-2009 03:13 |
| cRIO configuration issue- serial connection to laptop | Torbots 1197 | FRC Control System | 5 | 28-01-2009 22:28 |
| cRio losing connection when "run as startup" | mgurgol | Programming | 2 | 12-01-2009 12:18 |
Threaded Mode