|
|
|
 In real life (IE when you go to apply your engineering skills to tasks in industry) there will be constraints on all sorts of things - many of which may or may not be "fair" or even "intelligent". You must learn to either work around them or use them to your advantage - preferably a bit of both. - OScubed [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#2
20-01-2010, 19:26
|
||||
|
||||
|
Re: classmate configration
The Classmate needs to have the IP address of 10.xx.yy.5, where xx and yy are the 4 digits of your team number. The cRio will have an IP address of 10.xx.yy.2 when imaged with the FRC cRio Image Tool. If you set your team number in the correct box on the Driver's Station, it will set the Classmate's IP to the correct number automatically. To get it working wirelessly, read section 2.10 of the control system manual. Hope this helps.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Classmate PC | lon.bushweiler | Control System | 8 | 22-01-2010 14:46 |
| Classmate Issues | ROFLcopter | NI LabVIEW | 10 | 16-01-2010 21:56 |
| Classmate HELP!! | mcristina444 | FRC Control System | 12 | 15-01-2010 18:59 |
| Classmate | MachineSMMC | NI LabVIEW | 10 | 15-01-2010 13:47 |
| classmate help!!! | a kenny03 | General Forum | 1 | 13-01-2010 20:33 |
Threaded Mode