Refnum Defining

Alan Anderson · #1 20-01-2010, 23:39

If you don't run the Robot Main vi, the Begin vi doesn't get called. I think that should adequately explain the problem you've been having.

elmer_fud · #2 21-01-2010, 19:53

Quote:

Originally Posted by Alan Anderson

If you don't run the Robot Main vi, the Begin vi doesn't get called. I think that should adequately explain the problem you've been having.

This is your problem. The program you run is Robot Main and it calls all the other sub VI's as they are needed or to run them.

Also your indicator is going to appear in the teleop front pannel not the driver station or robot main front pannels. You can have these front pannels open when the program is running though without any problems

Pausert · #3 21-01-2010, 21:45

Thanks for all the help. That seems to have fixed it.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
refnum registry location	Wendy Holladay	NI LabVIEW	1	17-01-2010 22:11
Defining a joystick	dr_jack3l	National Instruments LabVIEW and Data Acquisition	1	12-02-2009 09:59
Defining First code?	mormannoob	Programming	4	17-01-2008 23:36
Defining Leadership	Bomberofdoom	General Forum	8	17-09-2007 14:58
Defining file name?	Mike	Programming	2	08-02-2006 17:28