Quote:
Originally Posted by Mark McLeod
My mistake is confirmed. The Digital Outputs were reversed.
In the LabVIEW code the I/O counts begin at 0 not 1, so just be aware that Digital Output 1 is referenced in the code by "0". In C++ the reference matches as 1-8.
These labels are how the Driver Station sees them.
|
The pinout you show is accurate for the compatibility mode. However, if you click "Configure..." on the I/O tab, you can switch to enhanced mode at the bottom and then you can make all 16 digital lines input, or all 16 digital lines outputs or any mixture in between (in addition to a ton of other features).
I'm not sure what LabVIEW code you are referring to. If you mean that the array index is 0 for digital input 1, for instance, then you are correct, but that is simply because the index array primitive in LabVIEW is 0-based. Nothing in the API (compatibility or enhanced) is "0-based".
Mentors may not be the direct focus of FIRST, but they are just as involved as students are. They play a pivotal role in the success of FIRST and of the success of every team. - Dan Petrovic [more] 
Similar Threads
Hybrid Mode
