Can ping CRIO and bridge, but DS shows no comm and no code

when things start to get a little stressful, "FIRST: Fun Is Required. So Tolerate!" - Rich Kressly [more]

		Chief Delphi > Technical > Control System > FRC Control System
Can ping CRIO and bridge, but DS shows no comm and no code

Thread Tools

Rating:

Display Modes

22-01-2010, 23:55

Green2

Registered User

FRC #2338

Join Date: Mar 2009

Location: Oswego

Posts: 20

Green2 is an unknown quantity at this point

Re: Can ping CRIO and bridge, but DS shows no comm and no code

Thanks for the reply guys. Problem resolved by turning off the windows firewall.

Just for future reference...it appears that you have to turn off wireless and the windows firewall in order for the cRIO to connect properly.

Barry

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Code deploys but does not save to cRIO	Bill Taylor	NI LabVIEW	11	15-02-2012 20:30
Default windriver program, no code and warnings on CRIO console out	pafwl	C/C++	1	16-01-2010 16:03
cRIO Does Not Communicate, Yet Can Be Pinged and Re-Imaged	1951-44U	FRC Control System	7	15-12-2009 21:25
Can not connect bridge and router wirelessly	team877	Programming	4	08-01-2009 00:18

All times are GMT -5. The time now is 05:35.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.