Goal Design

ysooazn1515 · #1 23-01-2010, 18:03

ok so we are attempting to mock-up the goal but we encountered a small problem. The height of the side panels of the goal given in the specs is about 29", but when we look back at the game manual, it says 24". The chains are almost 18" which would fit with the specs' measurements of the side panels' height of 29", leaving us with the specified 11" gap for the ball. Which measurement is the correct one? 24 or 29 inches??

EricH · #2 23-01-2010, 18:05

Quote:

Originally Posted by ysooazn1515

ok so we are attempting to mock-up the goal but we encountered a small problem. The height of the side panels of the goal given in the specs is about 29", but when we look back at the game manual, it says 24". The chains are almost 18" which would fit with the specs' measurements of the side panels' height of 29", leaving us with the specified 11" gap for the ball. Which measurement is the correct one? 24 or 29 inches??

The drawings trump the Manual. See Update #3.

So whatever the drawings and specs say is what the right number is.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Official 2008 Game Design] OK, so YOU design the 2009 game...	dlavery	FRC Game Design	69	23-08-2009 19:54
[Official 2008 Game Design] OK, so YOU design the 2008 game...	dlavery	FRC Game Design	25	20-02-2008 23:31
[Official 2007 Game Design] OK, so YOU design the 2007 game...	dlavery	FRC Game Design	44	17-12-2006 17:05
[Official 2006 Game Design] OK, so YOU design the 2006 game...	dlavery	FRC Game Design	29	08-01-2006 00:21