|
Re: Basic Stamp 2 connection to serial cable.
If you have an extra serial cable that you can damage, you can solder up your own small row connector.
The serial cable pins 2,3,4,5 go to the Stamp 1,2,3,4 (1+2 are TX+RX, 3 is Reset (for programming), and 4 is Ground)
The rest of the pins are not used for programming.
Is your stamp in a breadboard?
__________________
Student FRC23 (1996-1999), Mentor FRC246 (2000), Mentor FRC1318 (2007-2009), Mentor FRC93 (2011), Mentor FRC2151 (2012), Mentor FRC23 (2013), Mentor FRC4761 (2014-2017)
1998 - National Chairman's Award and Woodie Flowers Award (FRC23, Mike Bastoni  ) | 2007 - PNW SF (488, 1595) | 2008 - Oregon RCA - Seattle #2 Seed, SF (488, 1696) | 2009 - Oregon #1 Seed, Winners (1983, 2635) - Seattle SF (945, 2865) - Galileo #2 Seed, SF (973, 25) | 2012 Midwest F (111, 71) | 2014 RIDE Winners (78, 125), Inspector - NEU #24, QF (3479, 3958) - NECMP #35 | 2015 Reading #11, SF (1058, 190), Inspector - RIDE #17, QF(4055, 5494), Inspector - NECMP #57 | 2016 Reading #4, SF (133, 4474), DCA, Inspector - Ride #22, SF (1735, 2067), Creativity, Inspector - NECMP #48, RCA - Archimedes
|
Continue? You mean we can quit? Why didn't someone say so! - tsaksa [more] 
25-01-2010, 04:59
Similar Threads
Linear Mode
