pic: 2791 Teaser 1

[Chris is me]

loading photo ...

[21Jake21]

im guessing its going to be used to pull your robot up the tower by folding it

[Chris is me]

On the right track...

Note: as pictured it's not robot ready, it's missing various pulleys and spacers and whatnot.

[spacewolfx]

awww...that was going to be my guess

[Techgirl675]

or it could be used to right the robot if it turns over? I'm pretty sure it's to lift it though.

[EricVanWyk]

I think it is one of 8 legs for the robot. During normal configuration, it shuffle walks carefully with each leg bent up inside the BUMPER PERIMETER. During finale, it stretches the legs and gallops up the bump onto the tower. As an added bonus, the bot can now shoot in 8 directions.

[rsisk]

I think it is a workbench or table, used to intervene between an object and the gravitational pull of the earth below it. This one seems to be decorated with some sort of robot device and a collection of sockets.

[Jamie Kalb]

This is a three stage extending arm, right Chris? You're going to use it to lift some sort of hook up to the tower, then winch the rope in to lift the robot. The arm doesn't have to provide the lifting force, so it doesn't have to be very strong.

Did I get it?

[Chris is me]

Originally Posted by Jamie Kalb

This is a three stage extending arm, right Chris? You're going to use it to lift some sort of hook up to the tower, then winch the rope in to lift the robot. The arm doesn't have to provide the lifting force, so it doesn't have to be very strong.

Did I get it?

Yup.

A prototype is being built to actuate it from folded into the bumper area to fully extended with one pneumatic cylinder. Hook velcroed to the top for secure hold yet easy removal.

Find me at Champs (if you go) for your cookie.

[Jamie Kalb]

Originally Posted by Chris is me

Yup.

A prototype is being built to actuate it from folded into the bumper area to fully extended with one pneumatic cylinder. Hook velcroed to the top for secure hold yet easy removal.

Nice! This was an idea my team discussed a lot. One piston is going to actuate that whole thing? How does that work? I like how it's a really simple system, though.

Originally Posted by Chris is me

Find me at Champs (if you go) for your cookie.

Thanks! I'll try!

[Karibou]

Yay for winches, I believe we're doing something similar on our bot this year.

Originally Posted by Chris is me

Find me at Champs (if you go) for your cookie.

At this rate, you're going to owe a lot of people cookies.

[Chris is me]

Originally Posted by Jamie Kalb

Nice! This was an idea my team discussed a lot. One piston is going to actuate that whole thing? How does that work? I like how it's a really simple system, though.

One of the adult mentors had this thing that when he explained it to me, made perfect sense, that I can't very well repeat right now. It's easier to do talking with hands... I guess you'll have to wait until we get it working Something about the placement of the pivot point pulling the string and something like that.

Originally Posted by Karibou

At this rate, you're going to owe a lot of people cookies.

I plan on bringing a whole box of cookies (leaving it just outside the pits of course) and making runs to it throughout the event.

[martin417]

I would bet that the final design looks something like this (on a smaller scale of course):



LINK (if embedding doesn't work)

[Chris is me]

Pretty much exactly that. When all's said and done it may only have 2 or 2.5 stages. Very light and simple is what was desired, and a folding option to keep the tunnel as a possibility and to lower CoG during normal operation.

...I guess I'm defeating the point of a teaser if I tell you guys what it is.

[Akash Rastogi]

What's your winch looking like so far Chris? Which motors and gearbox.