Updateing Jaguar with serial

[Bryscus]

Originally Posted by seannoseworthy

Hi,

Thanks for the great advice, we had the both terminators. As recommended we had two jags in the network. Though our problem lays in the RJ-12 cable,
it turns out that we had bought a standard RJ-12 cable assuming that is was straight through when it was really reversed. So we just switched around the pins in our serial connector (White to Blue, Blue to White and Yellow to Black) after that everything works fine and were now running five jaguars in our CAN.

Good job! The hardest part of development is always that Hello World!

-Bryce